Thermoplastic Road Marking Machine
 
DY-STM-I/II Thermoplastic Road Marking Machine

DY-STM Thermoplastic Road Marking Machine

Related Products:
DY-BTS DY-MTS
DY-BTSC DY-MTSC
DY-STM-I/II DY-SPTC-Ⅰ/Ⅱ
DY-SPT-I/II DY-HPT
DY-MT
 

Technical Parameters

The DY-STM-I/II Road Marking Machine is a general driving type thermoplastic screeding type road marking machine, compact and small, flexible to operate. It is the optimal equipment for road line marking in medium or large urban road.

Exported Case of DY-STM-I/II   Total Exported Case
Kenya, Bahrain, Suriname, Vietnam, Ecuador, Morocco

Engine Kohler 25HP gasoline engine
Air compressor 0.6 m3/min
Heating Mode LPG, infrared burner, conducting oil heating, automatic temperature control
Paint tank capacity 160 L pressure tank
Glass beads bin 55L
Marking equipment Type I pneumatic screeding flat line marking shoe
Type II pneumatic screeding flat line or convex line marking shoe
standard configuration 150mm
Marking width 100mm, 200mm, 250mm, 300mm (at customers' option)
Marking thickness Type I 1.8-3.0 mm (adjustable)
Type II bottom line 1.0-2.5 mm (adjustable),
convex height 3-7mm (adjustable)
Control system Digital intelligent control system
Dimensions (L*W*H) 3500mm×1500mm×2350mm
Weight 1200kg
Optional system Pre-marking system, and trailer

Product Features

The DY-STM-I/II Road Marking Machine is a general driving type thermoplastic screeding type road marking machine, compact and small, flexible to operate. It is the optimal equipment for road line marking in medium or large urban road. Under the premise of sufficient melted material, it also has relatively high construction efficiency.

The DY-STM-Ⅰtype is for marking flat line, and the DY-STM-II type is for flat line and convex line marking. Equipped with hydraulic screeding marking bucket. structure board is made of imported special steel sheet with high-temperature resistance (2000℃), oxidation resistance and deformation resistance, more stable after stamping. The plinth is the pneumatic screeding structure that is made of special alloy steel. Tool bit of the floor knife that contacts with the ground directly adopts imported hard tungsten steel. The precision manufacture technique ensures screeding marking bucket better sensibility, abrasion resistance and firmness. The marking has more regular raised shape, evener and straight bottom line edge, and perfect head.

1. Advanced infrared gas heater or injecting diesel heater (alternative), saving more than 50 % fuels during construction.
2. Digital intelligent control system is sensitive, accurate and steady. The line type and length can be freely adjusted.
3. The heat conduction oil protective sleeve and built-in vertical hydraulic mixer make the heating evener, quicker, more secure and more environmental protection.
4. Advanced scraping apply structure can make the line straight and beautiful.
5. Advanced hydraulic drive and infinitely variable speed system can accurately control the speed and adjustment.
6. Mobile priority design can effectively control the operation of machine in emergency , ensure safety.

Product Photos

Send Enquiry


DY-SSAL Driving Type Cold Paint Road Marking MachineDY-HAL-II Hand-push Cold Paint Road Marking Machine