Two-component Road Marking Machine
DY-MSTC Driving Type Two-component Road Marking Machine

DY-MSTC Driving Type Two-component

Related Products:
DY-MSTC DY-SSTC-I/II
DY-STC

Technical Parameters

DY-MSTC Road Marking Machine is a kind of medium-sized driving type two-component road marking machine, used for highway and urban area road line marking, having swing structure type, screeding flat-line type and high-pressure airless spraying type.

Total Exported Case

Engine 26KW water-cooled three-cylinder gasoline engine
Air compressor 0.6m3/min
Paint tank capacity 130 L×2
Glass beads bin 55 L
Paint pump Equipped with double high-pressure airless plunger pump;
Maximum pressure:20MPa; Single pump flow:12.5L/min
Spraying gun Double pneumatic spray guns, one manual spray gun
Control system Digital intelligent control system
Applied paint Cold-solvent paint, water-based paint, tow-component paint
Spraying width 50-1000mm(adjustable)
Dimensions (L*W*H) 3700mm×1840mm×2450mm
Weight 782kg
Optional system Guide warning screen, pre-marking system, trailer

Product Feature

DY-MSTC Road Marking Machine is a kind of medium-sized driving type two-component road marking machine, used for highway and urban area road line marking. This two component cold paint road marking machine has good applicability for the cold spray paint, which can be applied to high viscosity and high solid content and mixed quartz sand or glass bead or other aggregate paint. This kind of thick road line coating, has good abrasion resistance and long service life.

1. Water-cooled electrical starting diesel engine with three-cylinder in line is environmental protection with low noise. The highest speed is 3000 r/min.
2. Imported oil pressurized continuously variable speed transmission with automatic brake device. The back wheels are equipped with a differential speed gearing to ensure it to drive freely around the curve and change directions timely.
3. The welded making shoe is made of special steel sheet that is impact-resistant and anti-oxidation.
4. Paint tank is made of stainless steel or cold-rolled anti-oxidation materials.
5. Pressurized glass beads bin with windows is observable and the pressure, flow rate and spray width of glass beads spraying guns can be freely adjusted to ensure the spraying glass beads firmer, evener and more economical.
6. The core control unit of this system is a PLC (programmable logic controller) which brings the micro-electronic intelligent control into effect to make its performance more stable and structure more compacted.

Send Enquiry


thermoplastic road line removal machineDY-BTS Big Driving Thermoplastic Spraying Road Marking Machine